Round Neck T-Shirts
The core of every wholesale order — clean crew neck tees in 100% combed cotton, cut for a consistent fit across the full size run.
Wholesale T-shirts, polos and knitwear
T-shirts, polos, hoodies and knitwear for international buyers, made to your specification. Fabric weights, size charts, labels and decoration are agreed for each order.
Polo T-Shirts
Corporate, hospitality and retail polos in pique and interlock, with placket, collar and cuff options built to your spec.
Oversized & Drop Shoulder Tees
Streetwear blocks in heavier GSM — boxy body, dropped armhole, wide rib neck. Built for print-led brands.
Hoodies & Sweatshirts
Brushed fleece and French terry hoodies, crewnecks and zip-throughs for autumn/winter programmes.
Performance & Sportswear
Moisture-management polyester and poly-spandex tees for gym, team and activewear programmes.
Kids & Youth Wear
Soft-handle tees, polos and sets for children — with the safety detailing children's buyers are required to check.
Women's Wear
Fitted and relaxed tees, crop tops, tanks and long sleeves cut on a dedicated women's block.
Private Label & Custom Programmes
Your brand, end to end — labels, tags, packaging and barcodes applied in our factory, shipped retail-ready.
In detail
Category notes
Round Neck T-Shirts
Our round neck tee is the piece we build most of our production around. Yarn is sourced as 100% combed cotton and knitted to our spec as single jersey by the partner unit we use for it, then bio-washed so the surface stays smooth after repeated laundering. Cutting and stitching happen on our own floor. The neck rib is 1x1 with a shoulder-to-shoulder tape, which is what stops the collar from stretching out — the single most common complaint we hear about tees bought from cheaper suppliers. Side-seamed construction is standard; tubular is available where cost matters more than drape.
Fabrics
100% combed cotton single jersey · Cotton–Lycra 95/5 · Poly-cotton blends
Weight
150 – 220 GSM
Size range
XS – 5XL (US, UK and EU size sets)
Polo T-Shirts
Polos are where finishing quality shows immediately. Cotton pique and PC pique are knitted to our spec, and the collar and cuff are knitted to size rather than cut from panel fabric — that keeps the rib dense and stops the collar curling after a few washes. Two-button and three-button plackets, contrast tipping, side vents and woven inner-neck tape are all standard options. For corporate uniform programmes we hold colour and lot consistency across repeat orders so year-two stock matches year-one.
Fabrics
Cotton pique · PC pique 65/35 · Cotton interlock · Performance polyester pique
Weight
180 – 240 GSM
Size range
S – 5XL, men's and women's blocks
Oversized & Drop Shoulder Tees
The streetwear block is a different pattern discipline from a standard tee: the body is boxier, the armhole drops onto the upper arm, and the fabric has to be heavy enough to hang rather than cling. We run 220–260 GSM loop-knit and heavy single jersey for this category. Because these garments are usually print-led, the fabric is pre-shrunk and compacted at the processing house before it reaches our cutting floor, so a large chest print does not distort after the first wash.
Fabrics
Heavy single jersey · Loop knit / terry · Slub cotton
Weight
220 – 260 GSM
Size range
S – 3XL, unisex block
Hoodies & Sweatshirts
Fleece programmes are seasonal, so lead time planning matters more here than anywhere else in our range. French terry and brushed fleece are knitted to our spec, and we finish with either a flat-lock or overlock construction depending on the price point. Hood linings, self-fabric or contrast drawcords, metal or plastic eyelets, kangaroo or split pockets and YKK-grade zips are specified per order. For buyers in the UK and northern US we typically recommend 300 GSM and above.
Fabrics
French terry · Brushed fleece · Poly-cotton fleece
Weight
280 – 380 GSM
Size range
S – 4XL, unisex and women's blocks
Performance & Sportswear
Performance fabric behaves nothing like cotton on the cutting table or under a print head, so we run it as a separate line. Micro-polyester and poly-spandex knits are finished with a moisture-management treatment, and decoration is sublimation or DTF rather than plastisol. Flatlock seams reduce chafe on longer-wear garments. Raglan sleeves, mesh side panels, reflective piping and laser-cut ventilation are available for team and club orders.
Fabrics
100% micro polyester · Poly-spandex 88/12 · Honeycomb mesh
Weight
120 – 180 GSM
Size range
XS – 3XL, men's, women's and youth
Kids & Youth Wear
Children's garments carry obligations that adult tees do not. We build kids' styles without drawcords at the neck, keep trims to a minimum, use flat labels or heat-transfer neck prints instead of scratchy woven tags, and can supply the fabric and trim documentation your compliance team needs. Fabric is softer-handle combed cotton, usually 140–180 GSM, since hand-feel is what parents judge first.
Fabrics
Soft combed cotton jersey · Cotton-lycra rib · Printed jersey
Weight
140 – 180 GSM
Size range
0–6 months through 14–15 years
Women's Wear
A women's tee is not a small men's tee, and buyers can tell. We grade on a separate block with a shaped side seam, adjusted armhole and a narrower neck opening. Cotton-lycra gives recovery on fitted styles; relaxed and boxy styles run in the same heavy jersey as our streetwear line. Crop lengths, scoop and V necks, cap and roll sleeves and racerback tanks are all part of the standard range.
Fabrics
Cotton–Lycra 95/5 · Viscose blends · Slub jersey
Weight
150 – 220 GSM
Size range
XS – 3XL, women's block
Private Label & Custom Programmes
Most of our export volume ships as private label. That means woven or printed neck labels, care labels to your market's regulations, hang tags, polybags with the right suffocation warning, barcode stickers and carton marking all applied here, so the goods can go from container to shelf without repacking. Send us artwork and a tech pack, or send a sample garment and we will pattern from it. Sampling turnaround is typically 20–40 days.
Fabrics
Any fabric from our range · Buyer-nominated fabric
Weight
To specification
Size range
To your size chart
Decoration
Printing & embroidery
Every decoration method is wash-tested before a bulk run goes ahead, whether it is printed in our unit or at one of the print houses we work with. Send artwork as vector where possible; we will tell you honestly if a technique will not hold up on the fabric you have chosen.
Screen printing
Plastisol and water-based, up to 8 colours. Best value on large runs of the same design.
DTG & DTF
Full-colour digital printing with no screen setup — the right choice for short runs and photographic artwork.
Sublimation
All-over and panel printing on polyester. Used for sports kit and performance ranges.
Embroidery
Computerised multi-head embroidery for logos, corporate identity and premium finishing.
Puff & high density
Raised print effects for streetwear and fashion labels.
Appliqué & patches
Woven, PVC and embroidered patches applied by us; embroidered patches are made at a specialist embroidery unit.
Ordering
How an order runs
From first enquiry to sealed carton, a typical private label programme moves through six steps. First orders usually take 30–45 days in production after sample approval, depending on quantity and decoration.
- 1 · Enquiry — style, fabric, quantity, destination and target delivery
- 2 · Quotation — costed per piece with an honest lead time
- 3 · Sampling — pre-production sample in 20–40 days
- 4 · Approval — fit, shade and print signed off by you
- 5 · Bulk production — with inline QC at cutting and stitching
- 6 · Inspection & despatch — final AQL check, packing, documentation, sailing
Tell us what you want made
Send a tech pack, a reference garment, or just a photo and a quantity. We come back with a quote and an honest lead time — usually within one working day.